Medical Vials FIlling Machine washing sterlizing filling capping
for 2,5,10 ml vials GMP standard
Performance characteristics
♦The vertical ultrasonic washing machine is the most popular
cleaning equipment in the world, with the best cleaning effect and
the best detection effect of visible foreign matters.It has a wide
range of application and a low rate of bottle breaking.In the whole
cleaning process, the water and gas are all used in dependent spray
needles, each spray needle only fixed with one cleaning medium, A
washing and cleaning process isc ompleted to avoid cross
contamination and dead angle,which meets the requirements of the
new GMP.
The tunnel type hot air circulation sterilization oven adopts the
laminar flow principle and hot air high-speed sterilization
process, which can make the container complete the whole production
process of preheating, drying and sterilization, cooling to the
bottle out under the condition of Class-Alaminar flow in the sealed
tunnel. It is the most popular drying and sterilization equipment
with the best sterilization effect in the world atpresent, with
uniform heat distribution, good pyrogen removal effect, and
equipped with mesh belt ultrasonic on-line cleaning, power-off
protection and air pressure automatic regulation system.
Vial Fillling Machine Spec:
| Model | LYQCL80+LYASMR620/48+LYKGF8 | LYQCL1000+LYASMR620/48+LYKGF10 | LYQCL120+LYASMR620/55+LYKGF12 |
| Adaptive Spec | 2-30ml national standard vials | 2-30ml national standard vials | 2-30ml national standard vials |
| Capacity | 6000-12000pcs/hr | 6000-18000pcs/hr | 6000-26000pcs/hr |
| Clarity | >99% |
| Breakage rate | <0.5% |
| Filling Torlerance | 0.5% - 2% |
| Fresh Water consumption | 0.2-0.4Mpa/0.6-1.0 m3/hr |
| Clean compressed air consumption and pressure | 0.3-0.6Mpa/35-80 m3/hr |
| Pass rate of stopping | more than 99% |
| Pass rate of capping | more than 99% |
| vacuum pumping speed | 60m3/h(external distribution) |
| Exhuast volume | 3500-4800m3/h |
| Weight | 9000 KGs |
| Total Power | about 90kw 380v 50Hz | about 93kw 380v 50Hz | about 110kw 380v 50Hz |
| Size | about 12600 X 2260 X 2445mm | about 12600 X 2260 X 2445mm | about 13200 X 2260 X 2445mm |
The filling and stoppering machine adopts a positive table design
structure, and can automatically complete the separation and
delivery of the bottle by means of the transfer and delivery of the
disksynchronous belt. It is the most popular and the most stable
filling and stoppering equipment in the world at present.
The capping machine adopts the principle of small knife side
follow-up rolling capping. The blade can be slightly adjusted in
the up and down, and the circumference direction. It is more
suitable for domestic packaging materials, and has good
adaptability and smooth
rolling mouth without damage.
♦The whole vial filling machine adopts advanced intelligent
electronic control technology, simpleand intuitivehuman-machine
interface, realizes the mechanical and electric alintegration
design, can be front and back linkage control and single machine
operation, ensures the normal operation of the whole line, and can
display the machine operation status and fault display, fault self
diagnosis, fault analysis and trouble shooting methods, so that the
whole production process can achieve automatic control.
Solution-Service:
Lingyao, We are where you are!
We are qualified to provide the following services:
- 7 days/24 hours Quick Service Response
- Site Installation, Commissioning, SAT and Training
- Accompanying production services
- Periodic Maintenance and Emergency
- Preventative Maintenance
- Remote Access
- Annual Maintenance Contract (AMC)
- Spare Parts Supply
- Modernization through Upgrade and Refurbishment
Our team:
- Service manager
- Mechanical technicians
- Electrical technicians
- Commissioning engineers
- Validation engineers
- Production supervisors
Accompanying production services. is acharacteristic service that Lingyao can provide to support our
clients:
- Move Forward commercial production smoothly and fast
- Minimize material and utilities lost
- Hand to hand training of operation and maintenance
